Blunt Trailing Edge Geometry and Its Effect on Airfoil Efficiency
Om Pande
https://doi.org/10.67698/pjpcr.2026.0199
Abstract
This study has examined how blunt trailing-edge geometry affects the aerodynamic efficiency of a NACA 0012 airfoil under a low Reynolds number of 100,000. Two blunt trailing-edge configurations, with thickness-to-chord ratios of 12.73% and 15.31%, were compared to the baseline airfoil. Furthermore, 5° upward- and downward-deflected trailing edges were used as reference configurations to provide comparisons to geometries designed to produce varying amounts of lift. The airfoils were analyzed by using XFOIL viscous simulations, comparing lift, drag, moment, and aerodynamic efficiency across different angles of attack. The results demonstrated that increasing the bluntness of the trailing edge could increase lift at higher angles of attack. However, this increase in lift was accompanied by a much larger amount of total and pressure drag, especially for the 15.31% configuration. Therefore, as trailing-edge bluntness increased, aerodynamic efficiency generally decreased. The increase in drag outweighed the benefits provided by the additional lift. Furthermore, the nonlinear behavior found in the drag and moment data may indicate the existence of wake-induced pressure abnormalities and laminar separation bubbles. Thus, the results pinpoint that severe trailing-edge truncation is not favorable under the low Reynolds number conditions examined in this study.
