Micro- and Nanoscale Surface Engineering for the Reduction of Friction and Wear in Modern Mechanical Systems: A Review
Connor Marek
Abstract
Roughly 23% of the world's energy consumption is spent in tribological contacts, so reducing friction and wear has large economic and environmental value. This narrative review asks which of five approaches, laser surface texturing, diamond-like carbon (DLC) coatings, graphene-based lubrication, molecular friction modifiers, and nanoparticle lubricant additives, is closest to broad industrial adoption, judged against five criteria: friction reduction, wear reduction, durability, manufacturing cost, and scalability and maturity. Sources were chosen by the rules in the Review Method section, each approach was rated high, moderate, or low on each criterion, and the ratings were scored. Hydrogenated DLC (friction coefficient 0.001 to 0.003) and graphene (about 0.004) reach superlubricity (below 0.01) only in dry or inert atmospheres; in lubricated service DLC gives about 0.05 to 0.1, and molecular friction modifiers such as MoDTC lower boundary friction from about 0.10 to 0.12 to about 0.04 to 0.06. Ordered by readiness, molecular friction modifiers rank first, DLC second, texturing third, nanoparticle additives fourth, and graphene fifth, and the first two exchange places under equal weighting. Because test conditions differed and the ratings are the author's judgments, the conclusions are qualitative.
